Hauptseite Ausschreibungen nach Land South Africa: Ausschreibungen

Quotations are hereby invited for the following: Supply and deliver batteries. Specification: Supply and deliver: 1. Battery 9 volt, unit of measure: Each, qty: 200: - Battery 9v Ultralife lithium, - Average voltage: 9v, - Non-rechargeable, - Nominal capacity: 1.2Ah Max, - Continuous discharge: 150mA, - Pulse capacity: 1A, - 5 years shelf life, - Delivery period: 7 to 21 days, 2. Battery AA Alkaline, unit of measure: Each, qty: 400: - AA Battery capacity (Avg): Alkaline: 2500 mAh, - Operating temperature: 0°C - 60°C, - Diameter: 14.5mm, - Height: 50.5mm, - Chemistry: Alkaline, - Delivery period: 7 to 21 days, 3. Battery R14, unit of measure: Each, qty: 100: - R14 size battery 1.5V, - Super Alkaline, - 5 years shelf life, - Delivery period: 7 to 21 days, 4. Battery AAA 1.5v, unit of measure: Each, qty: 400: - Alkaline AAA battery nominal voltage: 1.50 volts, - Alkaline AAA battery capacity (Avg) - Alkaline: 1200 mAh, - Alkaline AAA battery operating temperature: 0°C - 60°C, - Alkaline AAA battery diameter: 10.5mm, - Alkaline AAA battery height: 44.5mm, - Chemistry: Alkaline, - Shelf life: 5 years, - Delivery period: 7 to 21 days. Institution Name: Benedictine Hospital. Province: KwaZulu-Natal. Department of entity: Department of Health. Division or section: Supply Chain Management. Place where goods/service is required: Main Stores. Contract period (if applicable): Once off. (Ausschreibung №104488296de)

Bitte registrieren Sie sich

Teilen Sie dies:
Land: South Africa
Sprache: EN
Nummer: 104488296
Veröffentlichungsdatum: 16-05-2024
Quelle:

Beschreibung

Vollständige Informationen zur Ausschreibung sind geschlossen.
Für weitere Arbeiten mit der Website lesen Sie die folgenden Informationen.

Über uns

Führende Suchmaschine für Angebote und Einkäufe in Russland und der Welt

  • Die größte Datenbank mit Ausschreibungen und Beschaffungsquellen in Russland und der Welt
  • Kostenloser täglicher Newsletter gemäß Ihren Einstellungen
  • Informationen zu Ausschreibungssiegern im gewünschten Format
  • Bequemes Anzeigen und Hochladen von Informationen

Wähle uns

Erste Schritte

Registrierung auf der Site, danach stehen Ihnen die folgenden Site-Funktionen zur Verfügung:

  • Abonnieren Sie kostenlose Mailinglisten für Ihre Schlüsselphrasen
  • Ausschreibungsankündigungen anzeigen
  • Zusammenfassungsinformationen im Excel-Format exportieren
  • Teil der Informationen zu den Gewinnern, Lieferanten und Kunden von Ausschreibungen anzeigen

Registrierung

Um alle Funktionen der Site nutzen und alle Informationen anzeigen zu können, müssen Sie ein kommerzielles Konto registrieren

  • Tarif ausgewählt
  • Bezahlen Sie den Zugriff auf eine der möglichen Arten

Voller Zugriff
Логик контроллер PLC-ийн CPU худалдан авах /Шатахуун хангалтын алба/ Quelle: Төрийн худалдан авах ажиллагааны цахим систем

Аэродромын цэвэрлэгээ үйлчилгээний троссон шүүр болон плугны резин Quelle: Төрийн худалдан авах ажиллагааны цахим систем

Сумын цахим танхим байгуулах Quelle: Төрийн худалдан авах ажиллагааны цахим систем

RELOCATION WORKS FOR SOFT LANDSCAPE for Northern area Municipality Gardens and road Quelle: Tender Board - Kingdom of Bahrain

Supply of Bently Nevada Machine Condition and Monitoring Modules for the new 1HCU Wash Water Injection Pumps P7704A and P7704B Quelle: Tender Board - Kingdom of Bahrain

Eskom Holdings SOC Ltd (hereinafter “Eskom”) invites you to submit a tender for the following: Inspection and repairs of ducting on units 1, 2, 4, 5 and 6 during planned outages for Duvha Power Station. The scope of modification is as follows: • Full inspection and submit report; • Grease bearings and ball joints on links; • Remove bearing stuffing box cover, clean shaft, repack & box up bearing stuffing box; • Fit new packing on all ducting inspection doors; • Replace flue gas damper doors, shafts, shaft pins, frames, divisional plates, bottom supports, 30mm square bars, 80 x 6mm seals on doors, bearings, links including mechanical settings after replacements. Doors to be collected from the stores by the contractor; • Replace all 30mm square bar sealing strips on flue gas damper; • Replace all 80 x 6mm seals on the flue gas damper doors; • Mechanical, electrical stroke checking and settings of all dampers; • Clean all debris and ash pile up within the ducting including FD fan intake screens using plastic bags; • Cut access Holes and install handrails around the holes 2500 x 1500 meters, replace after completion of internal work; • Open access doors; • Replace 6mm - 10mm thick eroded plate by welding new; • Replace 12mm - 16mm thick eroded plate by welding new; • Repair grease pipes & nipples; • Close access doors; • Vertical weld repairs on 6 - 10mm plate; • Vertical weld repairs on 12 - 16mm plate; • Horizontal weld repairs on 6 - 10mm plate; • Horizontal weld repairs on 12 - 16mm plate; • Replace bearings; • Replace 80 x 80mm angle iron Stiffeners; • Replace 100 x 50mm channels in front of doors, position of channel to be in line with 100% open door position; • Replace 100, 120, 250, 300mm x 6mm protection plates; • Replace 80Nb stays with 100 x 10mm protection (protection plate), Unit 1, 2, 4, 5 and 6 vanes: • Replace 1650 x 520 x 6mm deflector vanes and 1650 x 25 x 10mm flat bar protection (Top); • Replace 1500 x 260 x 6mm deflector vanes (middle); • Replace 1645 x 480 x 6mm deflector vanes (bottom); • Replace 1650 x 25 x 10mm deflector vanes (top). Economiser outlet to A/H inlet: • Replace 6mm-10mm thick eroded plate by welding new; • Replace 10mm-16mm thick eroded plate by welding new; • To fit 196 50mm socket and plugs; • Deflector plate 1200 x 2500mm; • Repair 25 x 10mm Dividing walls protection; • Replace round bar on ducting access ladders; • Remove and replace 16mm, 25mm round stainless steel thermocouples pockets with protection; • Replace 80 x 6mm seals on the flue gas damper; • Replace 35mm square bar sealing strips on the flue gas dampers; • Fit new packing; • Cut and replace 60 x 6mm wide expansion joint sections; • Attach chains and damps to hanger rods; • Replace cell inlet damper stainless steel seals; • Replace cell inlet damper 40 x 40 x 6mm angle iron; • Replace 120 x 75mm round shaft on the flue gas damper. Quelle: ONLINE TENDERS